Precision Guide for HBS351 Bandsaw

Precision Guide for Holzkraft HBS351 Bandsaw

This is a guide add-on for the Holzkraft HBS351 Bandsaw to cut thin strips and fine workpieces. It attaches to a 42 mm wide main guide of the saw and lowers down to 3 mm above the saw table. This way you can adjust the guide for the saw blade down almost all the way. 

Printing: This is a 3-part model, you will need 1x part A and 2x part B. Use M5 brass inserts on the inside of part A for the set screws. 

ATTENTION: Use at your own risk and follow all the necessary safety measures to protect yourself when using your machine. This is NOT an item designed to take care of any safety issues for you. I am not responsible for any damages to you or your machine.

Usage: Make sure not to over-tighten the setscrews when using the guide or it will warp the base and potentially skew your cut. Also, be sure to adjust it so that there is a relief of the workpiece after it passed the blade.