Magnetic Cable Management Arches

Magnetic Cable Management Arches

These arches are designed for magnetic cable management along metal surfaces using internally threaded pot magnets. They allow quick installation while keeping cables neatly organized and securely routed.

Magnets

Two versions are available, depending on the magnet size used:

• 10 mm Version
  Designed for:
  https://www.supermagnete.de/topfmagnete-mit-innengewinde/neodym-topfmagnet-10mm-mit-innengewinde_ITN-10

• 13 mm Version
  Designed for:
  https://www.supermagnete.de/topfmagnete-mit-innengewinde/neodym-topfmagnet-13mm-mit-innengewinde_ITN-13

Both versions are designed to use an M3x6 DIN 912 screw to mount the magnets into the part.

Cable Capacity

• 13 mm Version

  • Cable channel radius: R12

  • Maximum cable diameter: Ø12 mm

  • Example combinations:

    • 1× Ø12 mm cable

    • 2× Ø10 mm cables

• 10 mm Version

  • Cable channel radius: R10

  • Maximum cable diameter: Ø10 mm

  • Example combinations:

    • 1× Ø10 mm cable

    • 2× Ø8 mm cables

Printing

The part is designed to be printed on its side and does not require support material.

The built-in tolerance is 0.1 mm (radial)