Modular Cress/Sprout Sieve/Farm V2

Based on this work.
Reworked version of the Modular Cress/Sprout Sieve/Farm V1.
The previous version had some flaws regarding the claning of the individual trays. So I modified the setup to allow the individual trays to be removed for cleaning.

Sieve and bottom are compatible to V1.

Required hardware:

• 8x 1.7x10 self tapping, counter sunk screws (8x for connecting 2 modules)

Available Files :

• farm_bottom: water tank to keep your sprouts hydrated
• sieve: removable sieve to put your sprouts on
• spacer: used to build up the “shelf” together with the connectors
• connector_2d: for stacking multiple modules and at the same time ensuring enough lighting for the sprouts

Usage (for cress):

1. put 2 table spoons of cress seeds in a glass of water and wait for 15min
2. put one layer of wet seed on the sieve
3. make sure to keep thee seeds wet for the initial 2 days, carefully water them from above of fill the tank entirely.
4. after 2 days the sprouts have grown roots and can be watered by just filling the tank
5. After 5-6 days you can harvest the sprouts.

Remixes

In case you want to replace the spacers by a special one for the corners of the farm: https://www.printables.com/model/1254546-farm_v2_ends

Printing Instructions

• Prusament PETG Urban Grey
• layer height 0.3mm
• No raft

Feedback Appreciated

Please give feedback and post your makes. I am curious to see your prints and setups.

Better tolerances and modularized for connecting multiple modules.