Wine Cork Trivet for MINI

This is a remix of this design, but for MINI printer.

It is exactly the same model, but I removed one cork perimeter allowing this great design to be printed on the MINI!

I attached the f3d model for anyone interested!

10/04/2022

Uploaded a new V2 model with the following changes: 

• Fit for slightly larger corks measuring around 21.5mm diameter (some works would not fit the v1 model)
• Reduced the cork-trivet global height by 4mm to save material (see screenshots for comparison V1 vs V2)
• Added two spacers for the cork-cutter jig: 4mm and 6mm
  • This allows you to cut shorter corks (see attached screenshots)
  • Most of the shorter corks can be cut in two halves, allowing you to use both ends of the same cork
• Rebuilt the Fusion 360 model so that everything can be configured via parameters
  • With this change you can basically adjust the diameter, and fusion will automatically compute all measurements to adapt the new diameter.

Notes

• You still need the cork-cutter jig which is available on the original model page.