Strawberries 4 color sign for garden (no MMU)

Based on this strawberrie svg on Noonprojects, I've made a strawberry sign to know where I've plant my seed in my raised garden on my balcony. Gcode is already setup as four-color.

Straberry_V2.STL /Straberries_0.2mm_PLA_MK3S_1h11m.gcode : 

• 1st layer: Green
• 2nd layer: white
• 3rd layer: red
• 4th layer: black

Take the shorter print if you want a “small” sign who is 55mm width. Otherwise the longer in time is 110mm width.

If you take the STL, I would suggest to reduce the width and height, but to keep the Z to 7mm thick.

With V3, I changed the order of the color so the white is more visible.

StraberrySmall_V3.STL /StraberriesSmallv3.gcode : 

• 1st layer: Green
• 2nd layer: red
• 3rd layer: white
• 4th layer: black

If you print it, and it works for you, please rate it, like it and post a make, that would be highly appreciated!