Prusa Mk3S Toolholder

I decided to make a toolholder that simply clicks on the frame and rests on the power unit.
It holds all the tools that comes with the printer kit! I also added room for a key that I use for nozzle changes.

so there's room for

• 4 alan keys
• 1 set of pliers ( from the kit)
• 1 small screwdriver (from the kit)
• 1 spanner/wrench (from the kit)
• 1 set of tweezers

Print instructions

My version was printed on a Prusa Mk3S with standard settings

0.30mm DRAFT LK3 - Prusament PLA
No supports needed
Infill at 20%
No brim
first layer height 0.2
perimeter 2
solid layers 4 top / 3 bottom
grid infill