AceBrace Ender 3 Z-Brace - Clears stock components

Diagonal brace for the Ender 3

Clears stock components

You will need:

• 1x 480mm M10 Threaded Rod (Measure before you cut!!!!)
• 2x M10 Cap-nut
• 5x M4x10 (Hex head)
• 5x M4 T-nuts
• 1x M5x20 (Hex head)
• M5 Tap

With a glass bed I still get full 250mm of travel.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Supports:

Yes

Resolution:

0.2

Infill:

15-100

Notes:

Upper part:

Approx. 2h 46m print time.

Lower part:

4 Perimeters and 100% infill but from 8mm and up the infill is concentric.

Approx. 2h 22m. print time.

Post-Printing

Thread End of Ender

You must thread the frame with an M5 tap