Modèles 3D MaisonDécoration Intérieure

Dodecahedron Lamp

0 commentaires
Light up an area with this simple yet elegant lamp whose design is redone to have way fewer separate prints
2
4
0
30
mis à jour 2 mars 2026

Description

PDF

I remixed this lamp to have fewer individual parts to glue together. 

This lamp is 360mm (≈ 14 inches) tall and 320mm (≈ 12.6 inches) wide and deep.

You can use LEDs with this lamp and there is a special frame designed for LED wiring. You can also use E26 \ E27 standard pendant light with this lamp and there is a special insert for that. You also get a stand if you decide to put the lamp on some surface or you can hang the lamp with pendant light.

You will also find two types of films this time. One is simple and plane, but the other has numbering on it to make the D12 dice lamp for your gaming room.

Printing

Depending on the version you choose to print, you can refer to the guide below for the number of pieces that need to be printed.

LED Version

  • 11 Frame Pieces (DNO)

  • 1 Frame with Hole (DWO) for LED Strip Wire

  • 12 Insert Films (may need slight adjustment because of the nature of dodecahedrons and fittings

Pendant Light Version (Coming Soon)

  • 12 Frame Pieces (DNO)

  • 11 Insert Films 

  • 1 Insert Film - Pendant

Stand (Coming soon)

  • 1 Stand Top

  • 1 Legs Connector

  • 5 Legs

Assembly

  • Glue \ Press fit inserts into frames.

  • He used Vellum paper as the inside backing to diffuse the light. You can print and use either of the inserts for light diffusion as well. I used Amolen Polarized Rainbow 

  • Stick printed inserts or vellum paper to the inside of the frames.

  • Glue all frames together making sure if corded to put that frame on bottom,

  • Finish led work or pendant lamp before inserting the bottom insert. They used pendant light wiring kit.

  • Lastly attach the bottom panel. I used tacky craft glue to attach the bottom panel to be able to take it off if I need to change the bulb.

Tags

lightlampledrainbowdecor

Origine du modèle

L'auteur a remixé ce modèle.

Dodecahedron Lamp
 par Jal Shah
 

Différences du remix par rapport à l'original

I remixed this lamp to have fewer individual parts to glue together. 

This lamp is 360mm (≈ 14 inches) tall and 320mm (≈ 12.6 inches) wide and deep.

You can use LEDs with this lamp and there is a special frame designed for LED wiring. You can also use E26 \ E27 standard pendant light with this lamp and there is a special insert for that. You also get a stand if you decide to put the lamp on some surface or you can hang the lamp with pendant light.

You will also find two types of films this time. One is simple and plane, but the other has numbering on it to make the D12 dice lamp for your gaming room.

Printing

Depending on the version you choose to print, you can refer to the guide below for the number of pieces that need to be printed.

LED Version
  • 11 Frame Pieces (DNO)
  • 1 Frame with Hole for LED Strip Wire (DWO)
  • 12 Insert Films (may need slight adjustment because of the nature of dodecahedrons and fittings
Pendant Light Version (Coming Soon)
  • 12 Frame Pieces (DNO)
  • 11 Insert Films 
  • 1 Insert Film - Pendant
Stand (Coming Soon)
  • 1 Stand Top
  • 1 Legs Connector
  • 5 Legs

Assembly

  • Glue \ Press fit inserts into frames.
  • He used Vellum paper as the inside backing to diffuse the light. You can print and use either of the inserts for light diffusion as well. I used Amolen Polarized Rainbow 
  • Stick printed inserts or vellum paper to the inside of the frames.
  • Glue all frames together making sure if corded to put that frame on bottom,
  • Finish led work or pendant lamp before inserting the bottom insert. They used pendant light wiring kit.
  • Lastly attach the bottom panel. I used tacky craft glue to attach the bottom panel to be able to take it off if I need to change the bulb.

Licence