Hot Streak Boardgame 2026 insert and money tray

NOTE: This insert is for the 2026 print run of Hot Streak that has a shallower tray. Check that your tray is 26mm or 1inch deep before continuing.

Description

An insert for Hot Streak 2026 designed for sleeved cards. It includes a money tray and an optional model version for multi-colored printing.

Printing instructions

1. Print 2 of the T-shaped spacers: spacer-print-twice.stl, they lock together at the flat ends.

2. Decide whether you're printing in multi-color or not:

   1. No multi-color: print money-tray.stl and yes-no-tray.stl

   2. Yes multi-color: print trays-multi-color.stl and make sure to group the objects together and color them in your slicer.

How it works

1. Place the T-shaped spacers in a cross formation at the bottom of the tray.

2. Group 3 mascot betting tickets by mascot into each quadrant.

3. Separate the sleeved cards into 4 equal stacks, then place 2 stacks on each side of the divider.

4. Place the two trays on top, side by side.

5. If you're having trouble unpacking the trays, press down on the side of the money tray next to the yes-no tray. It should lever over to allow for easy extraction. (see 3rd pic)