CR-6 se No friction Spool Holder Replacement

Watching spools jumping all over the original holder was driving me nuts, so i made it better
23
71
0
632
updated April 3, 2022

Description

PDF

Here is my solution to Creality’s spool holder, designed to work with CR-6 SE (it may work with other Creality printers, I think the mount is standard across)
Utilizes standard 608 ball bearings, the 3D models are made to fit these
https: //amzn.to/3mcKKBJ (..remove space after https:)
I have noticed other brands may be a bit loose but should be OK to use.
I also recommend adding a 4” wood screw for support (don’t know where mine come from, had a couple left from other projects) attaching dimensions for reference try find screw with similar diameter or smaller, length is not as important, screw must be installed with ball bearings on the shaft otherwise you risking cracking it. I have not tested using this assembly without reinforcing screw, but with high infill percentage it may be ok with 1Kg spools

Parts compatible with Universal Container Filament Spool Adapter

Printed and tested with 0.2mm layers in PET-G and PLA (not just by me)
Enjoy!!

Tags



Model origin

The author hasn't provided the model origin yet.

License