Delta PSU Cover with 5v DC-DC converter mounts

This model is based on the original PSU cover for the MK3S for the Delta PSU ( https://github.com/prusa3d/Original-Prusa-i3/blob/MK3S/Printed-Parts/STEP/psu-cover-DELTA.step ).

This allows a DC-DC converter to be mounted out of the way on a MK3s. Designed for DC-DC converters such as https://www.amazon.com/BINZET-Converter-Regulator-Regulated-Transformer/dp/B00J3MHRNO/ .

Required Parts

• 4 - M3 5mm x 4mm x 3mm heatset inserts. These are the short kind specified in various Voron BOM
• 1 - DC-DC converter
• 2 - 4 M3 screws of appropriate length
• Long hex key
• Wire
• Crimps 

Installation

• Install the heatset inserts into the part
• Attach short wires to Delta PSU and to the 24v side of the DC-DC converter
• Attach required length wires to the 5V side
• Remove existing Delta PSU cover
• Attach new cover with original screws