15 deg remix + magnetic 2020-profile mount

I love the AirManager from SCHWEINERT but I wanted to place it in the corner of my printer hausing.
Therefore the power plug & the PWM control had to be moved to the front.
To make room for them I turned the blower by 15 degrees so the power plug with the cable can be pluged in in the front near the wall
 

parts which needed change are the blower-housing& the funnel.
I made a inlay for the PWM control to adjust easier to differnet types without need to reprint the whole housing (mine did not arrive when I started printing)
The other parts are unchanged.

I also made a magnetic mount which can be screwed to my 2020 profiles.
4 magnets 10mm diameter * 3mm are needed for it.
the places mathing the ones of the original Blower-housing-magnetic-cover

turned the ventilator by 15° so there is space for the powerplug at the front