LaserTree K-Series Modular Riser Legs + Table-Anchor Feet (Up to ~400mm Clearance)

What this is

A modular leg extension / riser system for LaserTree K-series machines designed to add clearance without sacrificing stability.

Key features

• Modular height: each leg uses 3 stackable sections (100mm each)

• Stable feet: feet can be anchored/bolted to the table for stability

• Big lift: raises the machine to nearly 400mm securely (depending on configuration)

• More versatility: extra clearance for fixtures, cable routing, odd-shaped work, and general workspace flexibility

Compatibility / fitment

• ✅ Confirmed fit: LaserTree K1 Pro 40W

• ⚠ Other K-series models: The K-series appears to share the same leg/mounting pattern, but I have not physically test-fit every model.
  If you test another model (K1 Pro 20W/30W, etc.), please comment your results so I can update compatibility notes.

Included files

• 100mm leg sections (modular stack pieces)

• Table-anchor feet

• Any required spacers/mounting pieces included in the upload

Hardware (basic note)

Use the same fasteners as your factory legs (or match the original size and choose longer bolts if needed).
For anchoring: use wood screws/bolts + washers appropriate for your tabletop.

Safety note

If you raise the machine high, anchoring is strongly recommended to reduce tip risk and keep the setup stable.