DragonForce Logo (HueForge)

Glow-in-the-dark HueForge print of the DragonForce logo. I used Overture Black and Glow Green PLA, but it should work with any dark and glow filaments. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 250x250mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#000000 PLA Overture Black Transmission Distance: 0.1

#ebf1e0 PLA Overture Glow Green Transmission Distance: 10

This print uses 2 unique filaments

Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Glow Green for the rest.