Valencia, Port and Marina, Spain - 3D Miniature

3D printable topographic miniature of Valencia, Port and Marina - 🇪🇸 Spain

Capture the beauty of Valencia, Port and Marina's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 39.459, -0.320 (LatLng).

It is scaled down from a geographic area of around 2.565 km x 1.799 km to a 3D printable miniature in the dimensions of 170.5 mm x 119.5 mm. The scale from the geographic area (4.613 sq km) to the miniature is approximately ~15044:1.

The terrain is modeled from geographic data for realistic terrain representation. Ideal for educational purposes, architectural visualization, or as a decorative piece.

Also don't miss out on the other miniatures. Find them in my miniature collection.

Explore all available miniature locations on the interactive miniature map.

Included Frames:

• Dimensions of 190.70 x 139.70 x 10.06 mm, text Engraving "Valencia" with hanging holes

• Dimensions of 178.70 x 127.70 x 9.56 mm, no text engraving with hanging holes (fits A1 mini bed size)

• Dimensions of 190.70 x 139.70 x 10.06 mm, text Engraving "Valencia, Port and Marina" with hanging holes

• Dimensions of 190.70 x 139.70 x 9.56 mm, no text engraving with hanging holes

What's Included:

• STL files for the miniature and all frame variants

• Generic 3MF containing all STLs for easy import into any slicer

• Bambu Studio 3MF with optimized print profiles for A, P, X, and H-Series printers (pre-colorized)

• Snapmaker Orca 3MF with optimized print profiles for the Snapmaker U1 (pre-colorized)

Recommended Print Settings:

• The included 3MF files contain two highly specialized print profiles: "miniature-classic" and "miniature-arachne". For optimal results, use "miniature-arachne" (note: expect long slicing times).

• Due to the nature of geographic terrain data, models may contain non-manifold geometry or areas that require support material. This cannot be avoided. Our included print profiles handle these cases well.

• For printers from other manufacturers or other slicers, check our Miniature Printing Guide for recommended settings (especially support settings).

Assembly:

• Gently put the miniature into the frame. Depending on your printer's calibration, that should be enough to hold the miniature.

• If in doubt, use some super glue. For PLA, I use this glue* (thick variant). I experienced best results with glue that contains Ethyl-2-cyanacrylat.

• Hanging Holes: My frames always have a hole pattern divisible by 10 mm - for this miniature's size the "Hanging Hole Distance" results in 60 mm between holes.

Contains information from OpenStreetMap, which is made available here under the Open Database License (ODbL).

*affiliate link: This post contains affiliate links. I earn from qualifying purchases at no extra cost to you.