Logo for Subaru Car Key

This is a Remix of:
https://www.printables.com/model/1135844-subaru-keychain
Yes Remix is officially not allowed, therefore, this model cannot be described as a remix but I have permission from the Owner @Francimor_1608603. Thank you again.

This Logo is compatible with Subaru Car Keys like this one:
https://de.aliexpress.com/item/1005008219464119.html
The electronics from the Subaru BRZ key fit into the housing with the 3 buttons if you modify the plastic very slightly. The silicone pad from the PCB NOT the Key housing also needs to be removed.
Furthermore, the emergency metal key doesn't fit into the case. It either needs to be recut or you simply attach the metal key to your existing keyring.

The file can be printed in two colors by changing the filament. No Multicolor Printer is needed. Alternatively, nail polish can be filled into the spaces as shown in one of the images. Then simply scrape off the excess with a knife after 5 minutes.
You can also spray the plastic part with chrome paint first and then fill it with nail polish.