I originally planned to use the “Fanttik V9 Auto Vacuum Storage Case” by Brim Reaper for my new Fanttik X200 (V10). While the V9 and V10 look identical in photos, after printing the original insert I discovered that their contours are slightly different.
Instead of just reshaping the insert, I designed this custom space divider. It maximizes the storage in the bottom compartment, allowing you to fit ALL X200 accessories in one place. I also reduced the height of the top compartment to 40 mm — just enough to keep the original hinges and latches fully functional.
Special Compatibility
The divider includes dedicated cells for:
The “Fanttik V8 Slim Blower to Vacuum Adapter” by Moosemouse.
My Exhaust Deflector (see my other models).
Print Settings
Printer: Prusa Core One
Material: PLA
Layer Height: 0.25 mm
Perimeters: 2
Infill: 15% Rectilinear
Printing Tips
Since this is a large and tall part, I recommend the following to prevent warping:
Brim: 8 mm (both internal and external).
Bed Adhesion: I used an Elmer’s glue stick to ensure the part stayed securely attached to the build plate throughout the print.
Happy printing!
The author marked this model as their own original creation.