Centauri Carbon filament (dry)-box-cover

A cover to keep the filament dry while leaving it on the printer. No modifications to the cc1 is necessary. Attaches with 6x4mm magnets (or use 2xGridfinity 6x2mm magnets), or use the FreeCAD file and change the magnet size in the varset. My initial version used just 6x2 magnets, but they were a bit on the weak side. I've included a filament guide for 6x6 magnets to help prevent the box popping off during print if the magnets are to weak.

This is not a box for long time storage, rather an easy solution to keep the filament dryer and dust free while sitting on the printer. Gasket is optional. It's not necessary to print it. the slit is sized to fit 1.75mm tpu, so just cut to length.

Print time with standard speed PETG, about 4h 45min.

Parametric FreeCAD file included for easy customization.