I printed this in PETG @240° C nozzle, 85° C bed
0.15 layer height on my Prusa MK3S+
Probably best to print @ 100% infill, which I did.
The print file (pre-sliced gcode) was sliced using Prusa Slicer, for a Prusa MK3S+
In my example, I put it on a Brandt auger, but would probably fit on any brand.
NOTE:
I wouldnt use this unless you have the same printer, instead, download the STL and slice it yourself. I am not responsible for potential damage to printer.
If this helps you in any way please remember to download and like as it gains Prusa meters ;)
The author hasn't provided the model origin yet.