Replica of Grenadier Halflings 2002B Miniature

This is a replica of figure B from the box "Halflings", number 2002 from Grenadier

(see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2002.jpg )

Reproduced using https://www.thingiverse.com/thing:1762299

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Ultimate

Rafts:

No

Supports:

Yes

Resolution:

0.1mm

Infill:

25%

Filament: eryone PLA brown

Notes:

This one is a pain to print.
The bow definitely needs supports, but you have to use extreme care when removing the support material or the bow will break.

I included a second model file that is 'manifold' in case you want to try printing him on his side. It works a bit better, but doesn't really solve the problem.

Print at 105% to match original.

Set Z = -0.3 mm if you print standing up, and also add support blocker to the head to keep the face free of supports (see image).

I think you could extrude some material, and while it is hot attach it to the ends of the bow and his hand, to make a bowstring.

Good luck!

Post-Printing

Be very careful removing supports from the bow or it will break.