LED Light table

This is my very first 3D design so is very posible that could be improved without effort.

These are the parts needed for mount a light table using an Ikea Lack table as a base.

Things to print:

• 4x corners (esquina_lack.stl)
• 4x central lateral (lateral_central.stl)
• 7x lateral 150mm (lateral_150_comido.stl)

• 1x lateral for wires (lateral_cables.stl)
  Also you will need:

• Lack Table from Ikea

• Opal white methacrylate 540mm540mm4mm
• 12x 4mm wood screws

• 1 5V led strip (2 meters)
  Optional:

• USB powerbank

Print instructions

Category: Playsets Print Settings

Printer: Geeetech i3 PRO W

Rafts: No

Supports: No

Resolution: 0.20

Infill: 20%

Filament: Geeetech PLA or PETG white and orange
Notes:

The laterals need to be rotated 90º in order to be printed without supports