Enclosure for the n-fuse tinyCurrent (µCurrent variant)

An enclosure that allows you to use tinyCurrent with three AA batteries.

Advantages

• Uses easily available batteries

• Additional weight (sits better on the bench)

• Extended battery life

Additional Parts Required

• 5× M2 × 8 mm countersunk machine screws

  • Used for the PCB and battery cover

  • Self-cutting screws for the PCB may be a better choice

• 4× M2.5 × 8 mm countersunk self-cutting screws

  • Used for the battery compartment

• Metal threaded insert M2 × 8 mm

• JST mini/micro 1.25 mm, 2-position cable

• 3x Keystone 209 battery contact

• 3x Keystone 228 battery contact

• Some additional wire to connect the contacts (~1mm OD)

tinyCurrent Project by n-fuse

Shop: https://www.n-fuse.co/devices/tinyCurrent-precision-low-Current-Measurement-Shunt-and-Amplifier-Device.html

Files: https://github.com/nfhw/tinycurrent