Vibration dampener Prusa I3 MK2

Somehow the vibration damper from https://www.thingiverse.com/thing:1707045 didn't fit snugly around the feet of the Prusa I3 MK2, so I drew a simple damper which has a bit large fit for the feet. They do an awesome job dampening the sound. When I run the printer at night, even at high power, I can sleep in peace (printer is one room over) :)

Let me know what you guy's think!

Update 2017-12-25
I added version 2 to the files. This is a bit of a stronger version because my first design started to creep at the back of the printer. Probably because all the weight is located at that side. Enjoy!

Update 2018-04-16
I added version 3 to the files. Another stronger version. I made the oval shape 1,5 mm instead of 1 mm and added some additional stiffeners to support the weight of the printer. Still trying to prevent the creeping.

Print instructions

Printer Brand: Prusa
Printer: i3 MK2 MMU
Rafts: No
Supports: No
Resolution: 0,2
Infill: 20%

Notes:

Printable without support if nozzle cooling is applied
Infill can be 20% however please check to see if the oval is printed fully, if not print on 100% else it will get a bit too weak.