Geeetech i3 pro W fan + 3dtouch mount

I needed a simple fan mount with including 3d touch on the side. Made my own and does the job well. Make sure to adjust the nozzle - probe distance x/y in marlin. Mine is

" #define X_PROBE_OFFSET_FROM_EXTRUDER 41 "

" #define Y_PROBE_OFFSET_FROM_EXTRUDER -46 "

Yours will probable around this.

The right hole is to mount the fan to the carriage. The middle hole is for a short bolt to mount to the carriage. The left hole is for the fan + mount only. All made for m3 size.

Print Settings

Printer:

Geeetech i3 pro W

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20

Filament:

black

Notes:

Printed at 50 mm/s
Bed - 60 °C

Heater - 205 °C

How I Designed This

Designed in FreeCAD.