Ender 3 S1 Z-axis Camera Mount Logitech C920 with Updated Version

LOVE IT!!!

I made the mistake of not noticing this was for the Ender 3 S1 when I have a regular Ender 3 so I just hot glued it into place.

Beware; like others the arm snaps off easily. Had to use a soldering iron and weld it back on. (edited)

Made some adjustments so it fits an SV01 Pro.

Filament: Prusa PLA Galaxy Black
Printer: Ender 3 S1 Pro with Klipper

Printed in Schmelzbar petg, some support structure under the rail would be nice.
Mine broke along the layer line even with only 50 % cooling.
Soldered back together with a piece of filament and an old solder tip at 270 C.

As someone else pointed out, it would be great if there was a notch / cutout for the limit switch wires but fits great otherwise!

Came out great! Fits very well on the x axis.

Works great, printed the longer version -- only slightly concerning thing was the wires coming from the limit switch(?) on the bottom of where this clips over, looks like it's fine in reality but a cutout would make it seem less sketchy.

Thanks I used the long version comes out nicely and a really good fit (edited)