Minimalist stand for BTT TFT70 (Updated)

Having acquired a BTT TFT70 I needed a case or stand but was limited to 200cm print volume putting many of the existing cases out of reach.

These simple legs are quick and easy to print and can be orientated either way up for a more vertical or more horizontal screen angle.

Obviously you will need two, one for each end.

v2: Have beefed up the design a little, I found when screw mounting the sides could bulge and split on the originals, also added versions with heat insert dimensions if thats your jam.
both versions now available with and without Hex cutouts (but you know Hexagons are bestagons!)