Wargame Ships - Sloop

Wargame Ships - Sloop

Printer:  Prusa Mk3s
Material:  PLA, PTEG, etc
Layer Height:  0.15 mm
Infill:  15%
Supports:  Yes, on tips of sails and bowsprit
Brim:  None

16-18 -gun Sloop Circa 1812

 

Not to any particular scale.
About 25 mm form bowsprit tip to stern.

Be very careful taking the supports off, the masts are somewhat fragile.
Use a naked flame – gingerly! -to get rid of any stringing.
File down any protruding plastic at your own risk!

Regards, Paul