Wargame Ships – Ship of the Line

Wargame Ships – Ship of the Line

Printer:  Prusa Mk3s
Material:  PLA, PTEG, etc
Layer Height:  0.15 mm
Infill:  15%
Supports:  Yes, on tips of sails and bowsprit
Brim:  None

100-gun Ship of the Line Circa 1812

 

Not to any particular scale.
About 52 mm form bowsprit tip to stern.

Be very careful taking the supports off, the masts are somewhat fragile.
Use a naked flame – gingerly! -to get rid of any stringing.
File down any protruding plastic at your own risk!

Regards, Paul