Swinging Desk Phone Holder with Power Lead Access

Swinging Desk Phone Holder

NB:  The desk doesn’t swing.  And it’s not a swingin’ 60’s retro thing, either.

It accommodates a phone up to 72 mm wide and 10 mm thick.  Scale to fit a smaller or bigger phone and use appropriately sized screws.

This is designed to screw onto the edge of a desk.

Material:  PLA, PTEG, etc
Layer height:  0.2 mm
Nozzle:  0.4 mm
Infill:  None
Supports:  None
Brim:  4 mm brim only on the pin

Assembly is fairly obvious: push the top_hinge into the slot at the side of the holder, line up the bracket and slide in the pin.  Screw it to whatever you want.