Katsuki Bakugo Gauntlet (My Hero Academia)

Be warned, current version is large and heavy. It's still WIP while I'm trying to lighten it up and save printing time.

The gauntlet has a 5" small opening and a 8.5" large opening and is about 10" at its widest width. The eight sections are themselves large with the largest section being ~225mm. You may need to divide further for smaller printers.

UPDATE 12/11: Thin-shell versions uploaded as well. I have not test printed these however I'm quite sure they'll need some additional internal structure - EVA foam or the like. They should cut material usage by about 40% and print time significantly.

Print Settings

Printer:

FolgerTech FT-5

Supports:

Yes

Notes:

Since it's so large and heavy you may need more perimeters or infill than you would normally suspect. Hopefully future versions can shed some of the weight.