GCODE_MMS2022_V5B2_V38B_PARTS_PLATE_RTP_0.2mm_PLA_MK3S_2h43m.gcode
GCODE_MMS2022_V5B2_V38B_PARTS_PLATE_RTP_0.2mm_PLA_MK3S_2h43m.gcode
0.40
0.20 mm
2.71 hrs
25g
Prusa MK3/S/S+
5 MB
|
April 1, 2022
GCODE_MMS2022_V5B2_038B_BASE_RTP_0.2mm_PLA_MK3S_11h49m.gcode
GCODE_MMS2022_V5B2_038B_BASE_RTP_0.2mm_PLA_MK3S_11h49m.gcode
0.40
0.20 mm
11.81 hrs
140g
Prusa MK3/S/S+
Example GCODE for the Multisystem V5 2022 base (MK3/S/+) 0.4mm nozzle
10 MB
|
April 1, 2022
GCODE_MMS2022_V5B2_038B_TOP_PLATE_RTP_0.2mm_PLA_MK3S_15h38m.gcode
GCODE_MMS2022_V5B2_038B_TOP_PLATE_RTP_0.2mm_PLA_MK3S_15h38m.gcode
0.40
0.20 mm
15.63 hrs
168g
Prusa MK3/S/S+
Example GCODE for the Multisystem V5 2022 Lid (MK3/S/+) 0.4mm nozzle
13 MB
|
April 1, 2022
MMS2022_V5B2_038B_FRONT_RTP.stl
MMS2022_V5B2_038B_FRONT_RTP.stl
This is the Multisystem top front cover (1 required)
351 kB
|
April 1, 2022
MMS2022_V5B2_038B_BASE_RTP.stl
MMS2022_V5B2_038B_BASE_RTP.stl
Multisystem base, can be used with the two top sections above. (1 required)
1 MB
|
April 1, 2022
MMS2022_V5B2_038B_BACK_RTP.stl
MMS2022_V5B2_038B_BACK_RTP.stl
This is the Multisystem top back cover. This back cover can accept an 2.5” SDD drive, or NVNME
306 kB
|
April 1, 2022
MMS2022_V5B2_V38B_Small_Parts_POWER_BUTTON_RTP.stl
MMS2022_V5B2_V38B_Small_Parts_POWER_BUTTON_RTP.stl
5 kB
|
April 1, 2022
MMS2022_V5B2_038B_C3_RTP.stl
MMS2022_V5B2_038B_C3_RTP.stl
Back panel – allows port access + optional cables for SCART + Internal USB devices (1 required)
103 kB
|
April 1, 2022
MMS2022_V5B2_V38B_Small_Parts_USB_PANEL_RTP.stl
MMS2022_V5B2_V38B_Small_Parts_USB_PANEL_RTP.stl
Front USB panel allowing access to all four USB ports (1 required)
10 kB
|
April 1, 2022
MMS2022_V5B2_038B_DUST_RTP.stl
MMS2022_V5B2_038B_DUST_RTP.stl
The front panel dust cover – use the full size if you are not using any of the Multisystem cart
55 kB
|
April 1, 2022
MMS2022_V5B2_038B_CART_DUST_RTP.stl
MMS2022_V5B2_038B_CART_DUST_RTP.stl
Alternatively, you can use the CART_DUST model if you are going to be fitting cartridges
42 kB
|
April 1, 2022
MMS2022_V5B2_V38B_Small_Parts_RESET_BUTTON_RTP.stl
MMS2022_V5B2_V38B_Small_Parts_RESET_BUTTON_RTP.stl
The reset button. Recommended to print in red.
28 kB
|
April 1, 2022
MMS2022_V5B2_V38B_Small_Parts_SDCARD_RESET_MOUNT_RTP.stl
MMS2022_V5B2_V38B_Small_Parts_SDCARD_RESET_MOUNT_RTP.stl
This is a mount for the Reset button and SD card.
84 kB
|
April 1, 2022
MMS2022_V5B2_V38B_Small_Parts_USER_BUTTON_RTP.stl
MMS2022_V5B2_V38B_Small_Parts_USER_BUTTON_RTP.stl
User and Menu buttons. Recommended to print one Yellow (Left/Menu) and One Blue (Right/User)
28 kB
|
April 1, 2022
MMS2022_V5B2_V38B_Small_Parts_THUMBSCREW_RTP.stl
MMS2022_V5B2_V38B_Small_Parts_THUMBSCREW_RTP.stl
These lock the back top panel in place, but allow very easy access without tools.
18 kB
|
April 1, 2022
Part_K_61-23038_1_Multisystem_16mm_POSTS_3D_RTP.stl
Part_K_61-23038_1_Multisystem_16mm_POSTS_3D_RTP.stl
Mounting posts for the DE10-nano (3 required)
14 kB
|
April 1, 2022
Part_Z_61-23038_1_Multisystem_Bare_PCB2_Outline_3D_RTP.stl
Part_Z_61-23038_1_Multisystem_Bare_PCB2_Outline_3D_RTP.stl
Useful PCB outline & key components on the MiSTer Multisystem board for designing your own case
4 MB
|
April 1, 2022
Multisystem_23038-2_how_to_3D_PRINT.pdf
Multisystem_23038-2_how_to_3D_PRINT.pdf
Read this first - How to print the 3D files
10 MB
|
April 1, 2022
The author hasn't provided the model origin yet.