Skadis hexagon board with interconnection system

A hexagon with a Skadis hole pattern that works well with Skadis accessories that can fit inside a single tile.   The tiles can be connected together with the included connector to form a pattern of multiple tiles. Connecting the tiles together allows for saving on screws needed, meaning 4 screws can hold several tiles safely on the wall.

The tile is designed to print on a MK4/Core One sized bed.

Note: The holes on each tile does not line up with the holes on the next tile, so you are unlikely to be able to use multi-tile accessories.

Material used:  Any particular should work, but PLA or PETG would be best.

Support:  Yes, enable support on build plate only because the indentation for the screw holes.

Print parameters: 10% - 15% infill (eg. grid pattern is fine), 0.20mm layer height. 

TIP: If you want to cover the unused screw holes, leave the support in (and don't use organic support).

Changes 09.02.2026:

• Made the hole for the screw head larger

• Added a small cover for the screw head

Changes: 26.02.2026:

• Make the connector to connect boards together slightly shorter to make them easier to fit.