CR-10/ Tevo Tornado MGN12 X carriage adapter

This adapter allows you to mount the stock CR10 (not tested) or Tevo Tornado (Tested) metal x carriage mount to an MGN12 H rail.

Just need to print the adapter, and re mount your rail.

Tips:

• When mounting rails they MUST be centered. I would strongly recommend you print thing:2152669 to align the rail on a 2020 extrusion

This mount is also compatible with the following Titan Aero Mounts:

• https://www.thingiverse.com/thing:3107151
• https://www.thingiverse.com/thing:3154738

NOTE: Working on v4 to allow for x endstop mount placement

Instructions/Considerations

Belt Clearance

When using this mount on the Rail the standard X motor mount and pully does not allow for enough clearance between the rail and the belt; you need to modify:

* Remove the stock x end stop plate holder, and replace the top right hand screw with a free floating idler for the belt to rest on * Print and attach the Tarantula X-Axis Idler mounts to raise the belt over the rail. you just need the idler mount, not the Motor. Category: 3D Printer Parts