Bunny Soap Mold
With this model, you can create your own bunny-shaped soap mold using silicone and 3D-printed parts.
3D print all the parts included in the model.
Use a silicone with a Shore hardness of around 20 to ensure easy unmolding.
Once all parts are printed, glue them onto a piece of cardboard to keep them in place.
Pour silicone until it reaches the middle of the bunny shape.
Let the silicone fully cure.
Brush the cured silicone with black soap (or mold release). This will prevent the second half of the mold from sticking to the first one.
Pour silicone again until you reach the top of the mold.
Let it cure completely.
Your bunny soap mold is now ready to use 🐰🧼
The author marked this model as their own original creation.