Shelve brackets for briefcase type Stanley parts organizer. Brackets are compatible with old and new type of Lundia ladders. Easy to modify for 30cm depth shelves. Uses regular Lundia shelf holder pins, no screws.
Each module holds 3 boxes. For that you will need:
4pcs of brackets
12pcs of rails
Assemble the rails in-place. Note that you may need to clean up the friction fastening end of the print as the tolerance is quite tight. I do not recommend using a brim, should print easily without.
I used 15% infill with PLA, but structurally even less should be fine, unless your boxes are extra heavy.
The author marked this model as their own original creation.