Stand, mount and clamps for microphones

Adjustable Microphone Holder

Introduction

This is a fully 3D-printable microphone stand with corresponding clamps for different microphones.

If you need an additional clamp for a specific microphone model, feel free to let me know in the comments.

Models

• The mount.stl is the mount for the microphone and should be combined with a clamp and a stand. The file contains multiple objects, so do not forget to split it and rearrange the objects on your print bed.

• The XXXX_clamp.stl files contain the clamp model for a specific microphone.

• The stand.stl is the desk stand.

• Optional: The mount is compatible with the following model. So if you want to mount your microphone to a drum, print this one as well: https://makerworld.com/en/models/1986301-drum-microphone-holder-with-screw#profileId-2141111

  • In that case you also want to print the drum_mic_holder_screw.stl

Printing Instructions

The parts are quite easy to print. No supports are needed if you orient them correctly on the print bed. I would recommend to use PETG or ASA for the threaded parts, with a 60 % infill (or more) for mechanical strength.

Mounting 

After printing, mounting should be quite straight forward. 

Make it your own

I included the STEP file. Feel free to modify the stand as you please.

If you have questions, remarks, suggestions, I would be happy to hear from you.