Sanding Belt Block

Motivated by this thing https://www.thingiverse.com/thing:2963110 to make a stronger block and with a specific shape, this one was born.

I print slow, normally at 25 mm/s... so this beast took 1d 9h.

No top or bottom layers and with 5% infill on the full honeycomb pattern. Also 8 walls around.

The sanding belt is 457mm X 75mm (these are the ones I am using: https://smile.amazon.com/gp/product/B07JZMMJPD/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 )

You may want to use support on the pin if you like the inside dome to be clean, otherwise, no support is needed. I didn't use support.

Print Settings

Printer:

AM8 + Titan Aero

Rafts:

No

Supports:

No

Resolution:

0.2 mm

Infill:

Body = 5% ; Pin = 15%

Filament:

Black How I Designed This ===================

Using Rhino 3D and this idea I found on the web: https://www.instructables.com/id/Simple-Belt-Sander-Blocks/