RPM long arm (Bandit) conversion for RC10

Custom parts for mounting RPM73282 (Bandit) rear arms on RC10. Arm itself has 3deg toe-in therefore this arm mount has 0deg toe-in. Both 1deg and 2deg anti-squat arm mounts included in this set. B4-series CVA/CVD bone and wheel needed. Standard RC10 hub. Front arm RPM80492 can be mounted without any special parts.

Original build topic

https://www.rc10talk.com/viewtopic.php?t=40129

PARTS:

Front end:
-10T kickup ASC7305 and bulkhead ASC7207
-Inner hinge pin ASC7209
-Front arm RPM80492
-Outer hinge pin ASC8423 or ASC7357
-Caster and steering block ASC6210 + ASC6225
-T3/B3 front axle ASC7221
-B4 Front wheel ASC9588 or ASC9688

Rear end:
-Inner arm mount "RPM73282 Arm Mounts 0-1" or "RPM73282 Arm Mounts 0-2"
-Inner hinge pin ASC6380
-Rear arm RPM73282 (inbuilt 3deg toe-in)
-Outer hinge pin ASC6381
-Rear hub ASC7364 for 3deg/side toe-in
-Rear hub ASC7367 for 1.5deg/side toe-in
-B4 CVA/CVD bone ASC9672/ASC9597
-B4 pin or hex wheel