Toilet Paper Holder

Toilet paper holder that accommodates large rolls with a shelf.

It prints in two parts, the second is the cap (with a poop :-) ) that threads into the main body. Even though it is threaded, it is not meant to be removed : it only provides an obstacle so that the roll does not fall when rolled out. But it can still be removed if the roll has a small inner diameter.

Prints with no support, I printed at 0.32 layer height (using a .4 nozzle) and 0.45 layer width. The result is what you see in the picture. This should NOT be printed in PLA if you have children around! It survived a couple of months now in PETG and don't see it breaking anytime soon.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.32

Filament:

White

Notes:

I used 40% infill, 6 walls and 4 upper and lower layers. I might be over cautious but this is a long print, I didn't want to do it again if it ever broke.