Dry Erase Pen Holder

A pen holder you can attach to a Quartet glass dry erase board. No hardware required, it's friction fit.

The glass on my board is 3.65mm thick, if your's is about the same thickness, you can print the STL. Otherwise you can modify the 3d model. The model is parametric, you can change the values in user parameters.

Print flat with support inside the groove. No support needed for the holders as the angle should print ok with most printers.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament: PolyMaker PETG