Better Cupholder for Graco Stroller

After our 2nd child was born my wife bought a Grayco Double Stroller (linked below) and, for the most part its a fantastic. However, the stock cupholder left something to be desired. It had room for only one rather small diameter cup and the side cubbies were too shallow to safely put your phone in without bouncing out. In light of this, I present to you: an improved cupholder featuring:

2 large diameter cupholders

1 extra-deep cubby for phones and whatever

2 toddler-facing water bottle hooks

1 toddler-facing snack tray

and lots of crumb holes in the bottom to keep things clean

Checkout or modify the original OnShape CAD here: https://cad.onshape.com/documents/d86a2a0db4cc55a02dacd208/w/33924cc10cc2377784210010/e/eb5436d88305d94f8728085f

Link to stroller (so you know exactly what model this was designed to fit). https://www.gracobaby.com/sale/ready2grow-click-connect-lx-double-stroller/SAP_1934624.html

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

Yes

Resolution:

300

Infill:

20

Filament: Overature PETG Black

Notes:

Each STL should already be oriented for the best strength, but you will probably have to rotate the two large pieces to make them fit on your bed.

The "Left" and "Right" pieces do not require supports, but there is one built-in support in each side that will probably require some post-processing to clean up.

The two "hook" pieces do require supports.

I wanted this to be very durable so I printed it with 7 perimeters, which meant that this cupholder took about 50hrs of print time and 1.25kg of plastic.

After cleaning up each print the hook and body pieces slide together and screw in place then the two halves screw together.

You'll need thirteen 1/2" long, number 8, thread forming screws for plastic. I used the Plastite screw linked below. https://www.mcmaster.com/99512A316/

Category: Organization