Tough Pad (Onewheel XR / Funwheel footpad)

Remix of Huff Designs PubPad (Footpad for Funwheel's and XR's)

footpad

Designed so that a steel plate can be added during printing by pausing the print.

plates can be ordered in batches to reduce the price.
to get them use these places for different geographical locations:

USA: send cut send
Europe: give me a message here on Printables as i batch order them

The plate is intended to be made from 3 mm stainless steel and includes holes for M5 threads.
the internal space in the print is 3.2mm to keep American steel sizes in mind as well

This redesigned plate allows the front most screws, which normally go into inserts, to be mounted directly into the steel plate, making it impossible for them to slip out.

The design also accounts for forces from hooks, ensuring that loads are transferred through the plate directly to the M5 screws. This allows the pad to be made from TPU without the stresses bending the pad.

Using a soft material also enables a more durable pad, with the added benefit of improved comfort.

for questions send a message. 

best printed out of a tough material
TPU
PBT
PBA

with ample infill:
Top: 5
Bottom: 3
Shell: 5
Infill: 20-25%

1 redesigned the internal plate to be bigger so it goes to the top front side screws and front bumper screws.
2 taped holes in the plate for hooks and bumper screws 
3 closed space behind the plate so you add a pause in the print to insert it