Rolling doors box

Rolling doors box

The box has space for a label, which also serves as a connecting part.

* April 2, 2022 Rolling Doors Improved

I will add better photos and other sizes of the model later. 

Recommended printing options

Rolling door

• Pcs: 1
• Material PETG !!! PLA does not work, because it is very fragile
• Layer height 0-10
• Perimeters: 7

Box side

• 2 pcs 
• Material: PLA
• Layer height: 0.2 or more
• Perimeters: 3

Box inside

• Pcs: 1 
• Material: PLA
• Layer height: 0.15 - 0.2
• Perimeters: 2
• Supports: Yes (with smaller layer NO)

Label part

• Pcs: 2
• Material: PLA
• Layer height: 0.15 - 0.2
• When you need connect more boxes its possible change x size in slicer

Assembly instructions

Cleaning and repairing defects caused by printing. It is important to smooth the place where the blind moves.
	Insert the inner side part into one of the sides and insert the blind in the space between the parts.
Attach the second side part, align the blind. Fit the parts together.
	Finally, insert the securing part, which can serve as a connecting link for several boxes.
	You can glue the parts together for safety.

Size L