Simple shelf bracket

Simple shelf bracket. 75mm x 30mm

Intended for 10-12cm deep shelves.

Print Settings

Printer:

Railcore 300 ZLT

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

15% 3D Honeycomb

Filament:

Overture PETG

Marble

Notes:

Made this to support small shelves holding misc. plastic organizers full of screws, nuts, washers, wire crimp ends etc. Actual shelves will be made from reclaimed pallet wood.

Increase infill % if you need more strength.

Will work nicely with either M2.9 oval head screws or M3 self-tapping countersunk screws so they fit flush with face.

Use appropriate drywall anchors if you're going that route.

Category: Household