Snapmaker U1 Print Sheet Holder for IKEA Samla Top Cover

If you have a Snapmaker U1 and you use an IKEA Samla box as a top cover this might be for you. This print sheet holder should work with most of the top cover adapters out there. I even made extra high versions if your side blocks which hold the box in place are higher than the rim of box. You can choose holders for 2, 3 or 4 print sheets and they fit on both sides so you can store up to 8 print sheets. 

If you don't have a top cover yet you might take a look at mine:

Printing:
It is an easy print and no support is needed.

Assembly:
It should be a nice press fit and the parts are designed to interlock with the ribs in the rim (see pictures) so that they don't slide apart. The use of glue is optional. 

Please upload your make - I would love to see you prints!

Click HERE if you want to buy me a beer.