Von Kármán Haack Series Nose Cone

Von Kármán Haack Series Nose Cone

OD = 4.0"

OD#2 = 3.874"

ID = 3.748"

Length = 19.8"

Designed for a 4X wall thickness printing (4*0.4 mm)

Concentric infill (see Figure 4)

• Infill shouldn't matter, due to nose cone thickness being (4*0.4mm)
• Printed at 0.2 mm layer height, with 0.4 mm nozzle.
• Have split into 4*(6.0") sections for printing (Complete STL also included)
• Gorillaglue seams to complete and fill/sand before making female mold.
• Edit** Use Section 4.1 for an added fillet. (Print this section upside down)