Zebra Technologies SmartLens(tm) SNAP Install Guide (Type 1)

SmartLens SNAP Install Guide (Type 1) - Used to aid in the installation and alignment of the SmartLens SNAP units for proper real-time locationing in retail environments..  Please refer to the SmartLens Installation Documents pertaining to its proper function and use.

For more information on Zebra Technologies SmartLens solution for retail: https://www.zebra.com/us/en/solutions/intelligent-edge-solutions/smartlens-for-retail.html

SNAP Install Guide:

• Supports: Set to 2mm
• Build time: 1 hour 12 minutes
• Filament length: 7499.6 mm
• Plastic weight: 22.55 g (0.05 lb)
• Material cost: 1.04

Guide Aiming Sight

• Supports: Set to 1mm - Alternatively you can set a brim to help the part adher to the print bed
• Build time: 0 hours 14 minutes
• Filament length: 608.6 mm
• Plastic weight: 1.83 g (0.00 lb)
• Material cost: 0.08