Taper Gauge, metric

This taper gauge reads to 16mm on top face then to 29mm on side in 0.2mm increments. Mine printed with an accuracy of 0.1mm. If you want you can give each face a light sanding for calibration.

I will post photos and more details later.

Have fun with it, let me know if you have questions :). This is a good test of your printer and calibration.

Print instructions

Category: 3D Printing Tests Print Settings

Printer: Anet A8

Rafts: No

Supports: No

Resolution: 0.1

Infill: 25%

Notes:

Flip it on it's edge to print, otherwise the bottom side text will not come out well.

I slowed my printer, 15mm/s, to reduce ringing. I will update more detailed print setting later if there is interest.