Modular Prusa CORE One L Left or Right Side tool Storage Nextruder or INDX

Since i love the CORE One modular side storage and i needed it for the CORE one L i made my own.

The holes for INDX nozzles are currently untested but made from the original bondtech CAD drawings.

For the left tools tray the box with the wrenches and inbus insert is smaller! You can mirror the big box if you want place the small inbus/wrench box in the front or back of the printer. You can also mirror the inbus and wrenches tray, but watch out since the bottom has an angle! (Do not rotate)

If you want to tinker/add/remove/redirect tool holes within the large tray make sure you select all parts, and watch out the tools won't collide after printing.

When done orientating the tool holes:

1. Use place on Face button on the tray and click the bottom. Rotate to fit the bed. (Page up / Page down one press)

2. Slice and print. 5-15% infill is enough. Tested with gyroid on large tool insert

I stick them with very thin carpet tape in the side recesses. Magnets are useless here because the panel is aluminium.

Thanks for jonnieZG for the idea.