Airsoft V3 Gearbox Tappet Pack (V2)

V2 Changes:

• The neck is now full width to make it stiffer and less likely to "bend" with high speed builds.

• The Fin is slightly adjusted for better compatibility with certain sector gears

Ideal print profile:

• 0.2 Nozzle

• 0.08 Layer height

• 50 Walls (or 100% Infill concentric pattern)

Common print profile:

• 0.4 Nozzle

• 0.08 Layer height

• 50 Walls (or 100% Infill concentric pattern)

• 0.45 Line width.

Refer to the images for ideal print orientation.

Materials:

Tested with

• eSun PLA+

• Elegoo PLA+.

• ABS/ASA, PC or PA should also work.

PETG will 90% break, stock (non-plus) PLA will 100% break. I highly not recommend either of them.